اسم الكتاب

Biaxial Buckling of Thin Laminated Composite Plates A thesis Submitted in Fulfillment of the Requirements for PhD in Mechanical Engineering

القسم

ركن الهندسة المدنية والمعمارية - Civil and architecture

عن الكتاب

It was found that symmetric laminates are stiffer than the anti – symmetric one due to coupling between bending and stretching which decreases the buckling loads of symmetric laminates. The buckling load increases with increasing aspect ratio, and decreases with increase in modulus ratio. The buckling load will remain the same even when the lamination order is reversed. The buckling load increases with the mode number but at different rates depending on the type of end support. It is also observed that as the mode number increases, the plate needs additional support.

صاحب الكتاب

عدد القراء

1

عدد مرات التحميل

1

التقييم

تاريخ الأضافة

2019-02-2111:14 AM

نوع الملف

application / pdf

حجم الكتاب

1160074

التعليقات

{{ comment.created_at }}

{{ whoCommented(comment) }}

{{ comment.comment }}

{{ reply.created_at }}

{{ whoCommented(reply) }}

{{ reply.comment }}

لا توجد تعليقات

Top